Author Topic: Mean_Machine (Read 51938 times)

Snowman · « **on:** October 12, 2003, 11:35:38 am »

OK... THIS is where we continue

)

piglja · « **Reply #1 on:** October 12, 2003, 11:37:47 am »

and you could also post a link to the script itself aswell:))

Snowman · « **Reply #2 on:** October 12, 2003, 11:47:25 am »

Hope this is better

)

piglja · « **Reply #3 on:** October 12, 2003, 11:54:42 am »

yep:)

It is indeed:)

Thanks:)

REBEL · « **Reply #4 on:** October 12, 2003, 12:06:47 pm »

Hi Snowman
its good to see you here ;)

now where do we start !
messages to tagwall do not save .
as you know im on the new update. ive looked for the prob .but can't seem to find it .
REBEL

Snowman · « **Reply #5 on:** October 12, 2003, 02:09:00 pm »

v1.10.12.1

ERROR CORRECTED:
!setowner gave a wrong reply.

NEW COMMAND:
!setipguard This command sets if you want to test IPs against a list of banned IPs.
The list of banned IPs is actually PeerGuardians list (Guarding.P2P) and it must be in the Mean_Machine folder.
can be
0=off,
1=On in silent mode,
2 = On with message to OPs if a forbidden IP tries to get in to the hub.

Snowman

Snowman · « **Reply #6 on:** October 12, 2003, 02:10:44 pm »

REBEL:
I really don't get it with your problem. When I try to add to the TagWall then it works great.
Remember the change in the commands. !tagwrite is the command now.

Snowman

No0bie · « **Reply #7 on:** October 12, 2003, 02:16:30 pm »

I think the problem lies in the TagLimit itself...

It would write then after a period of time, it would clear out the tagwall even tho I specified it to be OFF( 0=unlimited)

So what I did to fix that problem was to comment out this part:

taglimit = 0

MrZ · « **Reply #8 on:** October 12, 2003, 06:29:54 pm »

:] Just wanted to say..HIA

Z ya

Snowman · « **Reply #9 on:** October 12, 2003, 06:50:24 pm »

WUUAAAHHHH!!!! No avatars *snif*....

REBEL · « **Reply #10 on:** October 12, 2003, 07:00:07 pm »

snowman
i'll have another look at the tagwall :))

Thanx for your fast reply .
would it be possible for a command for OPs, master Owner.
like this. !getreguserlist.
not sure if it could be done as i know most reg goes through ptokax.

REBEL

MrZ · « **Reply #11 on:** October 12, 2003, 07:50:37 pm »

Hia :))

Zitat REBEL:--------------------------------------------------------
would it be possible for a command for OPs, master Owner.
like this. !getreguserlist.
not sure if it could be done as i know most reg goes through ptokax
-----------------------------------------------------------------------
Lol been there sometime now Reb, try this:
!getuserlist () Shows a list of registered users: can be: g=guests, r=regged, v=vips, a=admins, m=masters or all=complete list

REBEL · « **Reply #12 on:** October 12, 2003, 08:42:52 pm »

ahh Z

i forgot . i just lost the plot for awhile ..hehe

REBEL

Snowman · « **Reply #13 on:** October 12, 2003, 09:55:32 pm »

v1.10.12.2

ERROR CORRECTED:
!setipguard :::: If was set to 2 then it failed to check against the IP-list due to a small error.

Sorry about this small error

)

BTW! Translations are welcome

)

Snowman

Snowman · « **Reply #14 on:** October 12, 2003, 11:26:02 pm »

v1.10.12.3

NEW COMMANDS:

FOR ALL:
!scriptinfo ::::: Gives a litle info about the script

OPS, ADMINS, MASTERS & OWNER:
!hideme ::::: Makes you disappear from the userlist. Then you can actually work "undercover"

) The other OP's+ gets notified when you hide.
!unhideme ::::: The opposite of the above

) Makes you visible to the public again.

Snowman · « **Reply #15 on:** October 12, 2003, 11:27:33 pm »

DAMN I'm flying right now... All those updates

Snowman

MrZ · « **Reply #16 on:** October 13, 2003, 06:06:56 am »

Hia :))

Code: [Select]


------------------------------------------------------------ 1.10.12.1 ------------------------------------------------------------
En användare med IP adressen som tillhör
försökte just komma in
Detta är en Privat hub!!!
IP Vakten är nu aktiv
IP Vakten är nu avstängd
IP Vakten är nu aktiv och ett PM kommer att skickas till OPeratörerna varje gång en blokerad IP försöker komma in
------------------------------------------------------------ 1.10.12.3 ------------------------------------------------------------
Du är nu gömd från alla användare och har blivit bottagen från användarlistan!
jobbar nu i det dolda!
Du är nu synlig igen och finns med på användarlistan!
jobbar inte i det dolda längre!

Snowman · « **Reply #17 on:** October 13, 2003, 01:43:36 pm »

Once again... Thanks for the fast translation MrZ

Snowman

REBEL · « **Reply #18 on:** October 13, 2003, 02:14:03 pm »

Mean_machine is working well..im so pleased with it :))

on my hub im running a loggerbot, to log users on and off.
it uses a lot of resources and i was wondering if such a thing can be incorperated in Mean_machine.
i know ptokax uses ms access which is basic info.
i just thought if it was possible, so it could all be in one script .

REBEL

REBEL · « **Reply #19 on:** October 13, 2003, 07:28:38 pm »

Hi snowman
ive come across a error.
had to reboot my hub to get back in, as rebel
the !hiideme command works but does not release your nick when you !unhideme.
you do show up on the hub but when you leave the hub your nick is still in hub script somewhere .
so when you reconnect it says your nick is already taken !.
REBEL
X(

Snowman · « **Reply #20 on:** October 13, 2003, 11:15:18 pm »

v1.10.13.1

ERROR CORRECTED:
IPGuard kept reporting the IP everytime it caught an IP to block. This is corrected now.

COMMAND UPDATE:
!setipguard
can be
0=off,
1=On in silent mode,
2 = On with a PM message IN MAIN to OPs if a forbidden IP tries to get in to the hub.
3 = On with a PM message IN another window to OPs if a forbidden IP tries to get in to the hub.

Snowman

Snowman · « **Reply #21 on:** October 13, 2003, 11:17:59 pm »

REBEL:
About the error... The problem is that the !hideme and !unhideme commands actually uses commands reserved for bots which makes them rather tricky... But I'll see if they can't be integrated to work properly.

About the loggerbot... I have thought about a log of some sort, but what do you want to register?
Nick, IP, Logintime...?

Please let me know.

Snowman

Snowman · « **Reply #22 on:** October 14, 2003, 12:30:59 am »

MrZ:
I have a request and an excuse...

I made an error in the trnaslation file line 312.
Can you please re-translate it?
Here goes:
IP Guard is now active and a PM is shown in main chat to the OPs every time a blocked IP tries to enter the hub.

AND there is ONE single line in the newest script

Thanks in advance pal

)

Snowman

REBEL · « **Reply #23 on:** October 14, 2003, 12:41:46 am »

sorry would use your latest update but that would only carry more bugs into programme

REBEL · « **Reply #24 on:** October 14, 2003, 12:59:54 am »

sorry about this but i know you were on a roll last night .
but ive got OPs that can't get in or disconnected ,
i dont think its just the hideme i think its also the peer guardian , its to unstable .
i used to use the peer guardian seperatly on my PC but ditched it because it would not let me get emails etc.
updates for virus checker,
im also an OP other hubs that run MM, i cant get into one of them as it says my nick is already taken.
unhappy REBEL
sorry thats how i feel
X(

MrZ · « **Reply #25 on:** October 14, 2003, 06:01:08 am »

Hia :))

Np at all Snowman..here we go :)

Zitat Snowman:----------------------------------------------------
IP Guard is now active and a PM is shown in main chat to the OPs every time a blocked IP tries to enter the hub.
-----------------------------------------------------------------------

Code: [Select]


IP Vakten är nu aktiv och ett meddelande kommer att visas i huvudchatten varje gång en blockerad IP-adress försöker komma in

New translation for - 1.10.13.1 --------------------------------

Code: [Select]


IP Vakten är nu aktiv och ett PM kommer att skickas till Operatörer varje gång en blockerad IP försöker komma in

Z ya

MrZ · « **Reply #26 on:** October 14, 2003, 07:36:04 am »

Hia again :))

Some small things just to make it even better, i could have done it for ya but i dono how to upload files here:

*Pls make some tabs in those help files to get all commands straigh in line and nice looking.

* Empty these files: releases.txt, rules.txt, web.txt, faq.txt and network.txt

Here is some changes ive made to "Mean_Machine Newbie Readme.txt"

*To update the Guarding.P2P file
Go to http://xs.tech.nu/pgi.htm and find the link "Guarding.P2P" and choose "save target as"
Save the file in the "Mean_Machine" folder and say yes to overvrite the old one

FILES ALLOWED TO EDIT MANUALLY:
faq.txt
forbiddenclients.txt (Not in use at the moment but will be in a later version)
network.txt
rules.txt
web.txt
advert.txt
forbiddenwords.txt
hublists.txt
releases.txt

About the PG (Peer Guardian) i vould just say to everyone pls be carefull ans suspicious with those entrys..they are made by ppl expirience and ppl can do mistakes

look here 4 moore info

Z ya

Snowman · « **Reply #27 on:** October 14, 2003, 10:51:00 am »

REBEL:
I'm really sorry to hear about all these problems and I must say I don't understand why they occur. The problem wiht !hideme I can understand but that one is not used then I can't find any flaws.
Regarding the PeerGuardian system... Just leave it turned off OR do the hard stuff... Start sorting the list out

I KNOW it's not 100% okay and there is some IP's blocked that should not BE blocked. But as I would add an IP-blocker anyway, why not use the PeerGuardians standard. The layout is generally good.
If you have other problems then I'd REALLY like to what they are and what messages the script gives you.
I'd hate too loose you as you are one of my best "costumers"

MrZ:
Again... Thanks for the translations.
About the tabs... I don't get it... I DID use tabs and it stands great on my machine using the oDC standard typeface (MS Sans Serif 8 point) on a 1024x768 screen.
And to all the other things... Thanks for the update to the Newbie file. It's updated now...
AND you're right... Stupid of me to have all those files with useless info to people... I'll empty them right away

You're my personal "cleaner"

Snowman

REBEL · « **Reply #28 on:** October 14, 2003, 11:25:57 am »

im looseing users. MM is blocking users that have M3u
thats one thing
user said goodmorning and got this
you are getting a WARNING because you are trying to use words NOT allowed on this hub!!
this is the only words i have put in forbidden file
dyndns.com
no-ip.com
serverbeer.com
serverftp.com
no-ip
fuck
bastard
no-ip.info
no-ip.org
things just seem to be getting worse for me .
REBEL ?(

Snowman · « **Reply #29 on:** October 14, 2003, 12:47:26 pm »

REBEL:
I have tried to set up a system with m3u files in the share and with the blocked words you describe. I don't get the problems you describe... REALLY don't know what's happening here... ?(

Snowman

Snowman · « **Reply #30 on:** October 14, 2003, 12:48:29 pm »

v1.10.14.1

ERROR CORRECTED:
Just a small error causing PtokaX to report a nil value when people just sent a " " (SPACE) in the chat.

COMMAND UPDATE:
!setipguard 3 ::::: Not only sends the report in a PM to OP's+ now, but also shows the exact IP
and offers a link to a WhoIs database so you can check if it's correct.

Snowman

MrZ · « **Reply #31 on:** October 14, 2003, 12:59:55 pm »

Hia

AlWaYs NiCe 2 HeLp Ya Snowman :))

If i open one of those help files (in notepad) they are in MS Sans Serif 10 points ? Could that be it?

Hrrm maybe its just stupid me who see it..hehe
After deluser is 4 tabs and after getuserpass is 3

Code: [Select]

 
 !deluser 				Revoke user's reg-status. Used for all userlevels.
 !getuserpass 			Shows the password owned by the user .

Its not a big problem Snowman i have got used to change them anyway..hehe i want all commands in there so i have put those built in and commands for other script in there too :))

Snowman · « **Reply #32 on:** October 14, 2003, 02:06:47 pm »

MrZ:
I must admit I would have thought that when using the same type then it wouldn't matter about the size but it seems so

Snowman

REBEL · « **Reply #33 on:** October 14, 2003, 08:12:14 pm »

snowman sorry
im getting complaints on my hub its all started since you put in hideme ..PG and forbidden words.
this is the sort of thing im being told

<[CS®]Aalasandria> she just said it said warning you are using illegal software
<[CS®]Aalasandria> that was cricket and elvis , munchie was illegal words

thats from one of my OPs.

it almost makes you feel you should not have updated
REBEL
:O

Snowman · « **Reply #34 on:** October 14, 2003, 10:46:20 pm »

REBEL:
Hmm... Sounds odd and I really don't get it... And I HATE that X(
I hope the problems will get solved in the new release below as this one has the !hideme & !unhideme removed. The other ones can't have any effect at all if they are disabled... IF they do then something is VERY wrong...

Snowman

News:

Author Topic: Mean_Machine (Read 51938 times)